Livraison partout au Maroc · Paiement à la livraison disponible
Analyse technique automatique de votre configuration — chaque suggestion est justifiée, pas générique.
Un équipement réseau nécessite un câblage adapté pour tenir le débit annoncé.
Produit officiel, garanti et facturé.
S'intègre à votre installation existante.
Pose facile ou par nos techniciens certifiés.
Conseil technique 6j/7 sur WhatsApp.
Switch Gigabit POE Smart 16 ports. 2 GE SFP. 225W — Hikvision DS-3E1518P-SI. Désignation constructeur : 16 Port Gigabit Smart POE Switch. Caractéristiques relevées sur la fiche officielle : ports : 16 × Gigabit PoE port, 2 × Gigabit fiber optical port ; budget PoE : 225 W ; capacité de commutation : 56 Gbps ; alimentation : 100 to 240 VAC, 50/60 Hz, Max. 4 A. Matériel constructeur neuf, garanti. Prix sur demande : nos conseillers vous répondent sur WhatsApp.
| Référence | DS-3E1518P-SI |
| Marque | HIKVISION |
| Catégorie | Autres produits |
| Disponibilité | Sur commande |
| Shell | Metal material |
Prévoir les fiches RJ45 pour sertir le câblage aux deux extrémités.
Protège les équipements réseau de la poussière et des manipulations, et range le câblage.
| Net Weight |
| 2.735 kg (6.03 lb) |
| Gross Weight | 3.31 kg (7.30 lb) |
| Power Supply | 100 to 240 VAC, 50/60 Hz, Max. 4 A |
| Surge Protection | 6 KV surge protection for PoE ports. |
| Installation Mode | Rack (equipped with mounting ears) |
| Relative Humidity | 5% to 95% (no condensation) |
| Operating Humidity | 5% to 95% (no condensation) |
| Storage Temperature | -40 °C to 85 °C (-40 °F to 185 °F) |
| Operating Temperature | 0 °C to 45 °C (0 °F to 113 °F) |
| Max. Power Consumption | 250 W |
| Dimensions (W × H × D) | 440 mm × 44 mm × 220.8 mm (17.32” × 1.73” × 8.69”) |
| Power Consumption in Idle | 25 W |
| EMC | FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011 +A1: 2014, EN 55035: 2017); IC (ICES-003: Issue 6); RCM (ASNZS CISPR 32: 2015) |
| Safety | UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 + A11: 2009 +A1: 2010+A12: 2011+A2: 2013, EN 62368-1: 2014+A11: 2017) |
| Chemistry | CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006) |
| PoE Port | PoE: Ports 1 to 16 |
| PoE Standard | IEEE 802.3af,IEEE 802.3at |
| PoE Power Pin | End-span: 1/2(+), 3/6(-); |
| Max. Port Power | 30 W |
| PoE Power Budget | 225 W |
| HPP | Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display topology information. 4. Display the alarm status. 5. Restart ports and devices. 6. Remotely upgrade the device. |
| QoS | QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode. |
| VLAN | VLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN. |
| Long Range | Ports 1 to 16: up to 300 m. Long range performance may vary depend on camera model or cable condition. |
| PoE Watchdog | Ports 1 to 16: auto detect and restart the cameras that do not respond. |
| Storm Control | Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication. Support port rate limiting based on broadcast, multicast, and unknown unicast packets. |
| Port Isolation | Ports 1 to 16: port isolation mode to improve network security. Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
| Loop Prevention | Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. |
| Link Aggregation | Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups. |
| Port Rate-Limiting | Port rate-limiting is used for port bandwidth adjustment to prevent network congestion. |
| System Maintenance | Remote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync |
| Ports | 16 × Gigabit PoE port,2 × Gigabit fiber optical port |
| Internal Cache | 4.1 Mbits |
| MAC Address Table | 8 K |
| Switching Capacity | 56 Gbps |
| Packet Forwarding Rate | 41.66 Mpps |
Compatible avec les principales gammes HIKVISION et les standards du marché. Pour vérifier la compatibilité avec votre installation, contactez nos experts — réponse en moins de 2 minutes sur WhatsApp.
